Hi there, I found out that my Sharp TV uses an RF type remote controls rather than a traditional IR type, so no obvious way of building a C4driver. Has anyone actually integrated a device to decode RF from a Sharp TV & converted it to IR for just this purpose, i.e. Control a Sharp TV with Con Select TV. Select Remote Control Setup. Follow the instructions that appear to program your remote to control your Sonos device. Connect the IR emitter to the IR Out port on the back of your TV. Place the emitter itself in front of the IR sensor on your Sonos device. Press the Menu or Guide button on your remote. Move the cable/satellite box further from the TV to avoid interference. Re-pair the remote with the TV (if possible). Replace the batteries in the remote. Contact manufacturer support. Voice control not working. Often, the remote will need to be connected over Bluetooth for the voice control to work. Make sure Bluetooth is connected. Make sure In today's video, I am going to show you how to fix any TV and AC remote control.First of all, try to remove batteries of your remote control. After that you Power reset the router/modem. Turn off and unplug the router/modem. Wait 60 seconds. Plug the router/modem back in and turn it on. Wait for your router/modem to complete its connection to the internet. Steps may vary. For model-specific information, refer to the manuals that came with your device. Go to Settings. With the correct code, you can program the universal remote to work with your Sharp DVD Player. The keycode identifies the brand and model of your device. The first step is to turn the Sharp DVD Player you want to configure ON. Then we press the TV button on your Universal Remote. Next, we need to press and hold the SETUP button of the IdUU6.

sharp tv remote not working